EYD16
Appleton®* Actual product may vary from image
UNILETS EYD Series 25 PCT Fill Vertical Conduit Drain Sealing Fitting With Removable Nipple, Size: 1/2 IN, Material: Grayloy-Iron, Finish: Triple-Coat (Zinc Electroplate, Chromate And Epoxy Powder Coat), Color: Gray, Connection: Tapered MNPT X Tapered FNPT, Turning Radius: 1.06 IN, Length: 3.28 IN, Width: 1-1/2 IN, Standard: UL 886 (1203), UL File Number E10444, CSA C22.2 No. 30, CSA 065181, UL Listed For Class I, Division 1 And 2 Groups C, D, Class II, Division 1 And 2 Groups E, F, G, Class III, For Use With Threaded Rigid Metal Conduit and IMC
Details
MFG PART #:EYD16
TRC Part #:EGSMEYD16
UPC #:781381620871
Inventory
$97.15 E
Details
MFG PART #:EYD16
TRC Part #:EGSMEYD16
UPC #:781381620871
Inventory
Attributes
Features
Documentation
Attributes
Brand:Appleton®
Type:Dust-Ignitionproof Explosionproof Raintight
Series:EYD
Size:1/2 in
Suitable For Use With:IMC/Threaded Rigid Metallic Conduit
Material:Grayloy-Iron
Color:Gray
Finish:Triple Coated
Dimensions:3.28 in L x 1.5 in W
Features
| Smooth, rounded integral bushing in each hub to protect conductor insulation |
| Accurately tapped, tapered NPT threads for tight, rigid joints and ground continuity |
| Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub |
| Restrict any explosion to the sealed off enclosure |
| Required in Class I, Division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures |
| Required in Class I, Division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps |
| Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location |
| Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit, seal must be located within 18 in of either enclosure |
| Required where cables which exceed rate of gas or vapor transmission permitted for seals are used in Class I, Division 2 locations |
| Tapered MNPT X tapered FNPT connection |