THQL21WY20
GE* Actual product may vary from image
A Molded Case Switch Breaker Is used to protect the circuit from being overwhelmed with large amounts of current. This could result in the breaker short circuiting or overloading. The THQL21WY20 breaker features 2 poles, an ampere rating of 20 A, an interrupting rating of 10kAIC, and a voltage rating of 240 V.
Details
MFG PART #:THQL21WY20
TRC Part #:GEDITHQL21WY20
UPC #:783164161632
Inventory
$183.76 E
Details
MFG PART #:THQL21WY20
TRC Part #:GEDITHQL21WY20
UPC #:783164161632
Inventory
Attributes
Features
Documentation
Attributes
Brand:GE
Type:Type THQL Compact
Voltage Rating:120/240 VAC
Amperage Rating:20 A
Frequency Rating:50/60 Hz
Interrupt Rating:10 kA
Frame:Q-Line
Trip Type:Non-Interchangeable/Non-Automatic/Thermal Magnetic/LI
Number Of Poles:2
Phase:1
Actuator Type:Pivot/Toggle Handle
Connection Type:Load Lug
Wire Size:14 to 8 AWG, 12 to 8 AWG
Mounting Type:Plug-In
Temperature Rating:10 to 50 deg C
Dimensions:3-9/32 in H x 2 in W x 2-3/8 in D
Material:Plastic
Features
Molded case is molded from high mechanical and high dielectric strength engineered plastic |
Trip indication is shown by handle position midway between ON and off to reset the trip mechanism, move the handle to extreme off then to ON position |
Quick-make, quick-break, trip-free mechanism minimizes arcing during breaker operation, contacts cannot be ''teased'' into position |
Trip-free mechanism is independent of manual handle control, the breaker trips under short circuit or overload, even though the operating handle is held in on position |
VERIFIER™ "twist-to-trip" and ''push-to-trip'' mechanically simulates over current tripping through actuation of linkages not operated by the on-off handle |
Common trip bar assures instant disconnect of all conductors when an overload or short circuit occurs on any one conductor in the circuit or an accessory trip device operates |
Silver alloy contacts combine the conductive properties of silver with other elements for clean, positive electrical contacting, pitting and burning are minimized for longer contact life |
Arc chutes of heat absorbing, insulating material and metal grid plates quickly ''extinguish'' arcs |
UL listed lugs for copper or aluminum cable, at full frame rating, easy access and simple, straight in wiring |
10 kA at 120 VAC, 10 kA at 120/240 VAC interrupt rating |