PWMS-H25-M
Panduit®* Actual product may vary from image
Panduit PWMS-H25-M winged push barb cable ties are designed for mounting a cable into a pre-drilled hole sized .229" to .255" (5.8mm - 6.5mm) and for maximum panel thickness of .105" (2.7mm). Made of Nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. For use with miniature, intermediate, and standard cross-section cable ties. They are natural in color and come in packages of 1000.
Details
MFG PART #:PWMS-H25-M
TRC Part #:PANDPWMSH25M
UPC #:074983583751
Inventory
$323.21 M
**Must be ordered in quantities of 1000**
Details
MFG PART #:PWMS-H25-M
TRC Part #:PANDPWMSH25M
UPC #:074983583751
Inventory
Attributes
Features
Resources
Documentation
Attributes
Brand:Panduit®
ETIM:EC000449
Tie Entry:2-Way
Mounting Type:Push Barb
Maximum Tie Width:0.19 in
Base Length:3/4 in
Base Width:0.37 in
Material:Nylon 6.6/Polyamide
Color:Natural
Features
Polyamide insulation |
Wing provides added stability |
Can be used where only one-side of the panel is accessible |
It is made of nylon 6.6, which increases mechanical strength, heat and wear-resistance and stiffness |
For use with miniature, intermediate, standard cable tie and where only one side of the panel is accessible |
Panduit® pwms-h25-m winged push barb cable tie are designed for mounting a cable into a pre-drilled hole sized 0.229 in to 0.255 in (5.8 mm to 6.5 mm) and for maximum panel thickness of 0.105 in (2.7 mm) |
Made of nylon 6.6, which increases mechanical strength, heat and wear-resistance and stiffness |
For use with miniature, intermediate and standard cross to section cable tie |